CNC Machining Centers
3-axis, 4-axis and 5-axis machining centers for complex geometries, milled features and multi-face completes in a single setup.
3 / 4 / 5-AxisComplex GeometrySingle-Setup Completes
Our Capability
Our Capability
Precision Capability, Proven in Production.
Our Dongguan production campus is equipped with a full range of CNC machining centers, CNC lathes and grinding machines — covering turning, milling, slotting and cylindrical grinding fully in-house, with the metrology to prove every dimension.
- Full-Range EquipmentCNC machining centers, lathes and grinders under one roof — no outsourcing of core processes.
- Tolerances to ±0.005 mmMachining tolerances down to ±0.005 mm (±0.0002") depending on geometry and material.
- Calibrated Metrology LabVision measuring, roundness and surface testers — material certificates and reports with every shipment.
- ISO 9001 Quality SystemProcess control from raw material incoming inspection to final 100% inspection and packaging.
±0.005 mm
Typical Tolerance
Typical Tolerance
±0 μmTolerance on Critical Dimensions
0–0 daysRapid Prototype Lead Time
0–0 weeksTypical Production Lead Time
0%Final Inspection Before Packing
Production Equipment
Equipment That Covers the Full Process.
Turning, milling, slotting and cylindrical grinding are all handled in-house — one campus, one quality standard.
CNC Lathes & Mill-Turn
CNC turning and mill-turn cells for shafts, pins, fittings and housings — rotational parts with tight concentricity and surface finish.
TurningMill-TurnShafts & Fittings
Grinding Machines
Surface and cylindrical grinding for high-accuracy finishes and close tolerances — the step that reaches ±0.005 mm and Ra 0.2 µm class surfaces.
Surface GrindingCylindrical Grinding±0.005 mm
Slotting & Secondary Ops
Slotting, drilling, tapping and deburring complete parts that milling or turning alone can't finish — fewer vendors, fewer handoffs.
SlottingDrilling & TappingDeburring
Inspection & Metrology
Measured, Recorded, Proven.
Calibrated measuring instruments and full inspection procedures guarantee dimensional accuracy on every batch — and the data to back it up.
- Vision measuring systems — 2D optical inspection of profiles, holes and toleranced features.
- Roundness & form testers — concentricity, cylindricity and run-out verification.
- Surface / contour testers — roughness and profile measurement to drawing spec.
- Hardness & material verification — incoming material checks with certificates retained.
- Full documentation — material certificates and inspection reports with every shipment.
Tolerances & Materials
What Our Machines Can Hold.
Materials in Regular Rotation
Common grades in stock; special alloys sourced on request.
Aluminum 6061 / 7075
Stainless Steel 303 / 304 / 316
Carbon & Alloy Steel
Brass & Copper
Titanium
Engineering Plastics (POM / PTFE / Nylon)
| Item | Capability |
|---|---|
| Machining tolerance | Down to ±0.005 mm (±0.0002") depending on geometry & material |
| Standard tolerance | ISO 2768-m; ±0.01 mm routine on turned & milled features |
| Surface roughness | Down to Ra 0.2 µm on ground / polished surfaces |
| Processes in-house | Turning, milling, slotting, drilling, grinding, finishing, assembly |
| Order volume | Small-batch, high-mix orders and volume production |
| Quality system | ISO 9001 based, incoming → in-process → 100% final inspection |
Lead Times
Fast Where It Matters, Flexible Where You Need It.
5–7
Working-Day Prototypes
Rapid prototyping gets first articles in your hands fast — with full dimensional reports for validation.
2–4
Weeks for Production
Typical production lead times with scheduled capacity and material planning for repeat orders.
1→10k+
Flexible Batch Sizing
Flexible scheduling for both small-batch, high-mix orders and volume production — scale without switching suppliers.
Quality System
Control at Every Checkpoint.
Our quality management is based on ISO 9001, with process control across the full workflow.
Incoming IQC
Raw material verified against certificates before it enters production.
First Article
Full-dimensional first article inspection and approval on every new job.
In-Process Checks
Scheduled spot checks hold dimensions stable through the batch.
Final 100%
Final inspection of every piece against critical dimensions before packing.
Pack & Document
Custom packaging with material certificates and inspection reports.
ISO 9001
Quality management system applied across the full workflow — from raw material incoming inspection to final 100% inspection and packaging. Ask us for our latest certificate with your inquiry.
FAQ
Frequently Asked Questions.
Machining tolerances go down to ±0.005 mm (±0.0002") depending on geometry and material. Standard work runs to ISO 2768-m; grinding operations cover the tightest requirements.
Rapid prototypes are typically ready in 5–7 working days. Production lead times are typically 2–4 weeks, with flexible scheduling for urgent orders.
Yes — flexible scheduling supports both small-batch, high-mix orders and volume production, so you can consolidate suppliers as your volumes grow.
Yes. Material certificates and inspection reports are provided with every shipment, and dimensional data can be shared per batch on request.
Put Our Capability to Work on Your Parts.
Send your drawing — we'll confirm tolerance, process and lead time with a detailed quotation.